Note: This function is not supported on Windows 7.

Syntax

  DialUpToCE( numModem, strDialPhone, strMyNumber, strUser, strPassword, optStrDomain, optAutoDial, optAutoClose )  

numModem

The modem used to dial to the Windows CE remote station.

strDialPhone

The telephone number of the Windows CE remote station.

strMyNumber

The telephone number sent to the Windows CE remote station. CERasSvr.exe will call back to this phone number.

strUser

The user name to be sent to Windows CE remote station. CERasSvr.exe will use this name to connect to the Windows XP/Vista/7 computer after calling back to it.

strPassword

The password to be sent to Windows CE remote station. CERasSvr.exe will use this password to connect to the Windows XP/Vista/7 computer after calling back to it.

optStrDomain

Optional The domain name to specify when logging on.

optAutoDial

Optional tag, which can be set to one of the following:

• 1: Triggers the DialupToCE connection automatically when the function is executed
• 0: Requests confirmation before triggering the DialupToCE connection automatically when the function is executed

optAutoClose

Optional tag, which can be set to one of the following:

• 1: Closes the DialUpToCE dialog automatically after dialing the Windows CE remote station
• 0: Leaves the DialUpToCE dialog open

Returned value

Notes

The DialUpToCE program was developed to dial a remote Windows CE station. Because Windows CE v3.00 does not provide a RAS Server, you must be running the CERasSvr.exe program on the Windows Embedded device to answer a call, and call back to a Windows XP/Vista/7 computer using parameters sent by the DialUpToCE function. You must configure the RAS Server service on the Windows XP/Vista/7 computer to answer the call back from the Windows Embedded device and set the TCP/IP connection.

Examples