Importing from OMRON CX Programmer Databases
Note: This import wizard creates the communication driver for the OMRON communication driver, which is enabled only for customers that purchase the product directly from OMRON. Consult your software vendor for further details. Moreover, the OMRON communication driver communicates with the OMRON PLCs by the FINS Gateway, which is supported for the Windows 2000/XP operating systems. Therefore, the FINS Gateway must be installed on the computer to enable communication between IWS and the PLCs through the OMRON driver.
This wizard allows you to import tags from a program for OMRON PLCs developed with CX Programmer and exported to a CXT file. When importing tags from the CX Programmer CXT file, the OMRON driver worksheet is automatically created to link the tags imported with the PLC, eliminating the need to configure the communication interface between IWS and the PLC manually.
Figure 1.
- Prefix: This box allows you to concatenate one of the following types of prefixes to the tags imported from the CX Programmer program:
- Custom: Check this option to concatenate a custom prefix with up to 8 characters to the name of the imported tags.
- PLC: Check this option to concatenate either the PLC name or the PLC Number to the name of the imported tags.
- Program: Check this option to concatenate either the Program name or the Program Number to the name of the imported tags.
- Serial Auto Address: This area allows you to configure the Network Address and the Initial Node Address for the PLCs configured in the product with Serial communication (if any):
- Network Address: This setting will be applied to all PLCs configured in the project with Serial communication.
- Node Address: This setting will be applied to the first PLC configured in the project with Serial communication. This setting will be incremented and applied to subsequent PLCs configured in the product with Serial communication.
- CXT File: Click the Browse button to select the CXT file, exported by CX Programmer, from which the tags will be imported.
In the grid displayed in Step 3 for this Data Source Type, there is an additional field with the label Address, which displays the name of the tags from the CX Programmer program.
Note: See Steps 1, 2 and 3 of Import Wizard for the settings and fields that are common for all Source Types.